Step 7: Connect Booms to Top Chassis Plate

Now you will carefuly lay out the booms to ensure the colors are placed in the corrrect orientation. The clear anodized (appear silver in color) booms will be at the front, and the blue anodized booms will be at the rear.

Parts Needed:

  • 4 â€“ Motor/Boom Assemblies, prepared inStep 5
  • 1 - Top Chassis Plate, prepared in Step 6


  1. Take a silver boom and carefully slide it over the front right pair of screws, so that the landing gear is pointing upwards.

  1. Repeat with the other silver boom over the front left pair of screws.

  1. Put the remaining two blue booms over the back two pairs of screws.